English
Shipping to:

Widget wyboru waluty Przelewy24

Shipping to:

Dynotest for Audi A4, S4, RS4 - B9 (Analog)
2015-2024

Dashboard type: analog cluster
€282.90
(incl. taxes)
Product code : DNTVAGV5

Product Information

Pay attention!

Audi A4, S4, RS4 - B9 car has 3 types of clusters: virtual 32 PIN, virtual 18 PIN and analog.
This device is designed for an Analog cluster.

Choose this device if your car has an Virtual 32 PIN cluster:
Audi A4, S4, RS4 - B9 (Virtual 32 PIN)

Choose this device if your car has a Virtual 18 PIN connector:
Audi A4, S4, RS4 - B9 (Virtual 18 PIN)

In cars with 2020 or later software, the check engine light may turn on while the device is in use. The light will turn off after driving a few kilometers with the device in the first mode (mode 1 - NOT ACTIVE), removing the device, or manually clearing the error with a diagnostic tool. This error is related to communication and data transmission between modules while the device is active.

This device is specifically designed for testing Audi A4, S4, RS4 - B9 (Analog) cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€282.90Add to basket

How to install
Audi A4, S4, RS4 - B9 (Analog)

Dashboard

Button

Information about the operation modes of the device on Audi A4, S4, RS4 - B9 (Analog) cars.

The hazard warning light on the dashboard will blink each time when the device switches between modes.

1
Mode 1
Press the "RETURN" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will display 100% of actual speed.
2
Mode 2
Press the "RETURN" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will display 50% of actual speed.
3
Mode 3
Press the "RETURN" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink three times.
The odometer will register 10 km for every 100 km driven.
Speedometer will display 10% of actual speed.
4
Mode 4
Press the "RETURN" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink four times.
The mileage block function will be FULL active.
Speedometer will display 0% of actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

OTHER, ALTERNATIVE PRODUCT NAMES SEARCHED FOR:

Mileage Blocker, Mileage Stopper, Odometer Stopper, Odometer Blocker, Mileage Correction, CAN Filter, CAN Blocker, Mileage Freezer, Odometer Freezer, CAN Freezer.

SERVICE CENTER

CUSTOMER CENTER →
SHIPPING →
TECHNICAL SUPPORT →
INSTALLATION SUPPORT →