What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for Aston Martin Vantage
2017-2024

€ 430.50

(incl. taxes)

Previous lowest price was € 430.50.

Product code : DNTASTV1

Product Information

This device is specifically designed for testing Aston Martin Vantage cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

Installing this device may cause the displayed average and current fuel consumption to be higher than the actual values.

It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€ 430.50Add to basket

How to install
Aston Martin Vantage

Coming Soon

1

Mode 1

Press the "BACK" button or pull HIGH BEAM lever 4 times.
Tachometer pointer on cluster moves once.
The mileage block function will be not active.
Speedometer will show the actual speed.

2

Mode 2

Press the "BACK" button or pull HIGH BEAM lever 4 times.
Tachometer pointer on cluster moves twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will show the actual speed.

3

Mode 3

Press the "BACK" button or pull HIGH BEAM lever 4 times.
Tachometer pointer on cluster moves three times.
The odometer will register 10 km for every 100 km driven.
Speedometer will show the actual speed.

4

Mode 4

Press the "BACK" button or pull HIGH BEAM lever 4 times.
Tachometer pointer on cluster moves four times.
The odometer will register 2 km for every 100 km driven.
Speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

Dynotest for Aston Martin Vantage 2017–2024: Advanced Mileage Blocker Solution

Unlock a new level of precision in automotive testing and diagnostics with the Dynotest for Aston Martin Vantage. This state-of-the-art device is engineered specifically for Aston Martin Vantage models from 2017 to 2024, providing a professional-grade mileage blocker and odometer stopper solution. Whether you’re conducting a thorough dyno run, performing chip tuning, or simply need to temporarily suspend mileage recording for testing purposes, our CAN blocker ensures accurate results without adding unnecessary kilometers to your vehicle’s odometer.

Seamless Odometer Stopper for Aston Martin Vantage

The Dynotest odometer stopper is designed with cutting-edge plug and play technology, making installation straightforward and hassle-free. Unlike other solutions, there’s no need for complex soldering or technical expertise. The device integrates seamlessly with your Aston Martin Vantage’s CAN bus system, providing a reliable way to stop mileage accumulation. The tool is ideal for professionals and enthusiasts who demand precision and reliability. For detailed instructions, you can refer to our installation guide.

Operational Modes for the Aston Martin Vantage Mileage Blocker

Our device offers four distinct modes, giving you flexible control over mileage recording. Switching between modes is quick and easy, with each mode change indicated by a corresponding movement of the tachometer pointer on your instrument cluster. This innovative design ensures you’re always aware of the active setting. The selected mode is automatically saved, so it remains active even after you turn the ignition off and on.

Mode 1: Press the “BACK” button or pull the HIGH BEAM lever 4 times. The mileage blocker function is inactive, and the odometer records 100% of the driven distance. The speedometer shows the actual speed.
Mode 2: Press the “BACK” button or pull the HIGH BEAM lever 4 times. The odometer records 50 km for every 100 km driven. The speedometer shows the actual speed.
Mode 3: Press the “BACK” button or pull the HIGH BEAM lever 4 times. The odometer records 10 km for every 100 km driven. The speedometer shows the actual speed.
Mode 4: Press the “BACK” button or pull the HIGH BEAM lever 4 times. The odometer records 2 km for every 100 km driven. The speedometer shows the actual speed.

Key Features of the Aston Martin Vantage Odometer Blocker

The Dynotest odometer blocker for the Aston Martin Vantage is more than just a mileage freezer. It’s a comprehensive tool for professionals. The device is non-intrusive and does not leave any traces in the car’s memory, making it the best mileage blocker for secure diagnostics. It is also a versatile tool that can be used for a wide range of vehicles. You can explore our catalog to find a mileage blocker for Ford, mileage blocker for BMW, mileage blocker for Mercedes, or even a specialized mileage blocker for Lamborghini. You can find detailed information about our products on our homepage.

Dynotest: Your Trusted Partner for Mileage Stoppers and Diagnostic Tools

At Dynotest, we specialize in high-quality mileage blockers, odometer stoppers, and other diagnostic solutions. Our products are trusted by tuners, workshops, and dyno centers across Europe and beyond. We offer a wide range of solutions, including a specialized mileage blocker for Audi, Porsche mileage blocker, and Range Rover mileage blocker. If you need assistance with installation or have any questions about our can bus blocker, our dedicated technical support team is here to help. You can also visit our FAQ section for answers to common questions.

Important Usage Notes for the Dynotest Device

To ensure successful operation, please keep a few important notes in mind. Always turn off the ignition when connecting or disconnecting the device. Switching between modes should be done while the car is stationary. This mileage jammer is designed for use in a controlled testing environment and is not intended for public roads. For further details on delivery or to find a local distributor, check our delivery information or the distributor contacts.

SERVICE CENTER

CUSTOMER CENTER →

SHIPPING →

TECHNICAL SUPPORT →

INSTALLATION SUPPORT →