What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for Audi A1
2017-2024

Dashboard type: Full LCD cluster

€233.70

(incl. taxes)

Product code : DNTVAGV4

Product Information

Pay attention!

In cars with 2020 or later software, the check engine light may turn on while the device is in use. The light will turn off after driving a few kilometers with the device in the first mode (mode 1 - NOT ACTIVE), removing the device, or manually clearing the error with a diagnostic tool. This error is related to communication and data transmission between modules while the device is active.

This device is specifically designed for testing Audi A1 cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€233.70Add to basket

How to install
Audi A1

1

Mode 1

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.

2

Mode 2

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 30 km for every 100 km driven.
Speedometer will show the actual speed.

3

Mode 3

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink three times.
The odometer will register 20 km for every 100 km driven.
Speedometer will show the actual speed.

4

Mode 4

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink four times.
The odometer will register 10 km for every 100 km driven.
Speedometer will show the actual speed.

Features of the mileage blocker for Audi A1

The odometer blocker for Audi A1 is a specialized device used for testing cars. It allows you to temporarily slow down (freeze) the odometer readings, which is especially noticeable during technical inspections or testing. This blocker will ensure the ability to avoid accumulating additional mileage, which can be critically important for preserving the vehicle’s performance and accurately assessing its performance.

The device is divided into specifications of the Audi models, the A1, and the lightweight of the Vikoristan. Due to its simplicity, drivers can easily integrate the blocker into the vehicle system without damaging its electronics. This allows you to focus on the important aspects of testing without any complications.

The odometer locker is also an important tool for auto repair shops and dealers to provide their customers with the most accurate information about the vehicle’s performance. With this technology, you can benefit from the correctness of the tests and the actual mileage of your Audi A1.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.