What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for Audi A6, S6, RS6 - C8 (32 PIN)
2018-2022

Dashboard type: virtual + analog cluster

€ 258.30

(incl. taxes)

Previous lowest price was € 258.30.

Product code : DNTVAGV2

Product Information

Pay attention!

Audi A6, S6, RS6 - C8 car has 2 types of clusters: 32 PIN and 18 PIN.
This device is designed for an 32 PIN connector.

Choose this device if your car has a 18 PIN connector:
Audi A6, S6, RS6 - C8 (18 PIN)

In cars with 2020 or later software, the check engine light may turn on while the device is in use. The light will turn off after driving a few kilometers with the device in the first mode (mode 1 - NOT ACTIVE), removing the device, or manually clearing the error with a diagnostic tool. This error is related to communication and data transmission between modules while the device is active.

This device is specifically designed for testing Audi A6, S6, RS6 - C8 (32 PIN) cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

Installing this device may cause the displayed average and current fuel consumption to be higher than the actual values.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€ 258.30Add to basket

How to install
Audi A6, S6, RS6 - C8 (32 PIN)

1

Mode 1

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.

2

Mode 2

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will show the actual speed.

3

Mode 3

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink three times.
The odometer will register 10 km for every 100 km driven.
Speedometer will show the actual speed.

4

Mode 4

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink four times.
The odometer will register 2 km for every 100 km driven.
Speedometer will show the actual speed.

Features of mileage blocker for Audi A6

The mileage blocker for Audi A6 is an advanced and indispensable tool designed specifically for professional testing, diagnostics, and inspection of vehicles in this series. This innovative device allows temporary suspension or freezing of the odometer readings, effectively acting as a mileage stopper. By doing so, it prevents the accumulation of unnecessary mileage during technical checks, road tests, or dynamometer evaluations, ensuring that the vehicle’s condition data remains precise and reliable. Maintaining accurate mileage is critical not only for vehicle diagnostics but also for preserving the car’s market value, which is especially important for premium models like the Audi A6.

The odometer blocker is designed for seamless integration into the car’s electronic system, providing mechanics with a convenient and easy-to-use solution. With just a few simple steps, professionals can activate the odometer stopper, allowing them to focus entirely on inspecting critical components without worrying about affecting the mileage. This functionality proves extremely valuable during comprehensive technical inspections, engine tests, or checks of individual vehicle systems such as the suspension, brakes, or electronics.

For garages, service centers, and dealerships, a mileage blocker device becomes an essential instrument. It guarantees accurate and transparent mileage readings for every customer, reinforcing trust and satisfaction. Using a milage blocker or stop odometer feature ensures clients can be confident that their Audi A6 has undergone thorough testing without risk of mileage distortion. By providing honest data and maintaining integrity in inspections, professionals can enhance customer relationships and uphold high business standards.

Whether for professional diagnostics, preventive maintenance, or performance evaluation, the mileage blocker and odometer stopper are indispensable tools that every Audi service professional should have in their arsenal.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

OTHER, ALTERNATIVE PRODUCT NAMES SEARCHED FOR:

Mileage Blocker, Mileage Stopper, Odometer Stopper, Odometer Blocker, Mileage Correction, CAN Filter, CAN Blocker, Mileage Freezer, Odometer Freezer, CAN Freezer.

SERVICE CENTER

CUSTOMER CENTER →

SHIPPING →

TECHNICAL SUPPORT →

INSTALLATION SUPPORT →