What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for Audi Q5, SQ5 - FY (Analog)
2016-2020

Dashboard type: analog cluster

€ 282.90

(incl. taxes)

Previous lowest price was € 282.90.

Product code : DNTVAGV5

Product Information

Pay attention!

Audi Q5, SQ5 - FY car has 3 types of clusters: virtual 32 PIN, virtual 18 PIN and analog.
This device is designed for an Analog cluster.

Choose this device if your car has an virtual 32 PIN cluster:
Audi Q5, SQ5 - FY (Virtual 32 PIN)

Choose this device if your car has an virtual 18 PIN cluster:
Audi Q5, SQ5 - FY (Virtual 18 PIN)

This device is specifically designed for testing Audi Q5, SQ5 - FY (Analog) cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

Installing this device may cause the displayed average and current fuel consumption to be higher than the actual values.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€ 282.90Add to basket

How to install
Audi Q5, SQ5 - FY (Analog)

1

Mode 1

Press the "RETURN" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will display 100% of actual speed.

2

Mode 2

Press the "RETURN" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will display 50% of actual speed.

3

Mode 3

Press the "RETURN" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink three times.
The odometer will register 10 km for every 100 km driven.
Speedometer will display 10% of actual speed.

4

Mode 4

Press the "RETURN" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink four times.
The mileage block function will be FULL active.
Speedometer will display 0% of actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

Dynotest Mileage Blocker for Audi Q5, SQ5 FY with Analog Cluster

The Dynotest mileage blocker for the Audi Q5, SQ5 (FY platform) with an analog cluster is a professional-grade odometer stopper designed for precise vehicle diagnostics and testing. This advanced CAN bus blocker provides the ability to temporarily suspend mileage accumulation during dyno tests, chip tuning, and other service procedures. It’s the perfect choice for professionals and enthusiasts who need to perform performance and quality checks without adding unwanted mileage to their Audi Q5/SQ5 odometer. Our device ensures accurate results and is a reliable mileage freezer for your vehicle.

Important Product and Compatibility Information for the Audi Q5/SQ5

This device is specifically tailored for Audi Q5 and SQ5 models from 2016-2020 that feature an analog instrument cluster. Please be aware that different models exist for cars with virtual clusters (32 PIN and 18 PIN). Installation is made simple with our plug and play technology, which means no soldering is required. You can find detailed video instructions for proper connection on our installation guide page.

Operational Modes for the Audi Q5/SQ5 Analog Mileage Blocker

The Dynotest mileage blocker offers four distinct operational modes for flexible control over mileage recording. You can switch between modes effortlessly by pressing the “RETURN” button or pulling the HIGH BEAM lever. Each mode change is confirmed by the hazard warning light on the dashboard blinking a specific number of times, so you always know your active setting. The selected mode is automatically saved and will remain active even after you turn the ignition off and on again.

Mode 1: Press the “RETURN” button or pull the HIGH BEAM lever 4 times. The hazard warning light blinks once. The mileage block function is inactive, and the odometer records 100% of the driven distance. The speedometer will display 100% of the actual speed.
Mode 2: Press the “RETURN” button or pull the HIGH BEAM lever 4 times. The hazard warning light blinks twice. The odometer registers 50 km for every 100 km driven. The speedometer will display 50% of the actual speed.
Mode 3: Press the “RETURN” button or pull the HIGH BEAM lever 4 times. The hazard warning light blinks three times. The odometer registers 10 km for every 100 km driven. The speedometer will display 10% of the actual speed.
Mode 4: Press the “RETURN” button or pull the HIGH BEAM lever 4 times. The hazard warning light blinks four times. The mileage block function is fully active, and the odometer records 0 km for every 100 km driven. The speedometer will display 0% of the actual speed.

Essential Usage and Safety Notes for Dynotest Devices

When using this mileage freezer, it’s important to remember that it is designed for off-road use only, such as dyno testing. It is not intended for use on public roads. Always ensure the ignition is off when connecting or disconnecting the module and switch modes only on a stationary car. For more details, visit our FAQ section.

Your Trusted Partner for Mileage Stoppers and Odometer Blockers

Dynotest specializes in high-quality odometer stoppers and mileage blockers for a wide range of top automotive brands, including Audi, BMW, Mercedes, Porsche, Ford, Volkswagen, and Lamborghini. Our products are trusted by tuners and workshops across Europe and beyond. If you need assistance with installation or have any questions about our CAN bus blockers, our dedicated technical support team is here to help. For delivery information or to find a local expert, please check our delivery page or our distributor contacts.

Enhance Your Diagnostics with a Dynotest Odometer Freezer

Our odometer stoppers and CAN filter blockers are engineered for precision and reliability. They are the ideal choice for anyone looking for a speedstop or speed tester tool. Visit our product catalog to discover more Dynotest solutions and take your vehicle diagnostics to the next level. Ready to improve your testing capabilities? Get your Dynotest module today.

SERVICE CENTER

CUSTOMER CENTER →

SHIPPING →

TECHNICAL SUPPORT →

INSTALLATION SUPPORT →