Dynotest for Audi Q8, SQ8
2018-2019

Dashboard type: virtual + analogue

€258.30

(incl. taxes)

Product code : DNTVAGV2

Product Information

This device is specifically designed for testing Audi cars.
It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.
It is not intended to be used on public roads.

Pay attention!
Audi Q8, SQ8 car has 2 types of connectors: 32 PIN and 18 PIN.
To make the right choice, look at what type of connector your car has.
This device is designed for a 32-pin connector.

Choose this device if your car has an 18 PIN connector:

€258.30Add to basket

How to install
Audi Q8, SQ8

Coming soon

1

Mode 1

Press the "OK" button 4 times.
In this mode, the mileage block function is not active.

2

Mode 2

Press the "OK" button 4 times.
Upon activation, the hazard warning light on the dashboard will blink twice.
In this mode, only 50% of the actual mileage is recorded and the speedometer will display the actual speed.

3

Mode 3

Press the "OK" button 4 times.
The hazard warning light on the dashboard will blink 3 times.
Aftet that, , the odometer will register 10 km for every 100 km driven and the speedometer will display the actual speed.

4

Mode 4

Press the "OK" button 4 times.
The hazard warning light on the dashboard will blink 4 times.
After that, the odometer will count 2 km for every 100 km driven; the speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE:

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.