What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for Audi TT, TT RS - FV (18 PIN)
2020-2024

€ 393.60

(incl. taxes)

Product code : DNTVAGV7

Product Information

Pay attention!

Audi TT, TT RS - FV car has 2 types of connectors: 32 PIN and 18 PIN.
This device is designed for a 18 PIN connector.

Choose this device if your car has an 32 PIN connector:
Audi TT - FV (32 PIN)

In cars with 2020 or later software, the check engine light may turn on while the device is in use. The light will turn off after driving a few kilometers with the device in the first mode (mode 1 - NOT ACTIVE), removing the device, or manually clearing the error with a diagnostic tool. This error is related to communication and data transmission between modules while the device is active.

This device is specifically designed for testing Audi TT, TT RS - FV cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€ 393.60Add to basket

How to install
Audi TT, TT RS - FV

Coming Soon

1

Mode 1

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.

2

Mode 2

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 30 km for every 100 km driven.
Speedometer will show the actual speed.

3

Mode 3

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink three times.
The odometer will register 20 km for every 100 km driven.
Speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

Dynotest for Audi TT, TT RS FV (18 PIN) – Odometer Blocker

The Dynotest mileage blocker for Audi TT and TT RS FV models with an 18 PIN connector is an essential tool for precise vehicle testing and diagnostics. This innovative CAN bus blocker is engineered to temporarily suspend mileage accumulation, making it ideal for scenarios like dyno testing, chip tuning, and service diagnostics. Specifically designed for your Audi TT FV (18 PIN) and Audi TT RS FV (18 PIN), this mileage stopper ensures your speedometer functions normally while preventing unwanted odometer readings. Whether you need a reliable mileage blocker or an advanced odometer stopper, this device offers unparalleled control and accuracy for your Audi TT.

Seamless Integration for Your Audi TT Mileage Stopper

Our Dynotest module integrates effortlessly with the CAN system of your Audi TT, TT RS – FV (18 PIN). This plug-and-play device requires no soldering or complex software setups, ensuring a hassle-free installation. Simply follow the video instructions for proper connection, and you’re ready to go. This odometer blocker module is precisely tailored for the Audi TT, TT RS – FV (18 PIN), guaranteeing optimal performance and preventing error messages. It’s a true mileage freezer tool for modern Audi vehicles.

Operating Modes for Audi TT and TT RS Mileage Blocker

The Dynotest mileage blocker for Audi TT and TT RS FV (18 PIN) offers three distinct operation modes, providing flexible control over mileage recording. Switching between modes is intuitive, indicated by the hazard warning light on your dashboard. This makes it a versatile meter stopper for various testing requirements.

Mode 1: Not Active – The mileage block function is inactive. Your speedometer will show the actual speed, and mileage will be recorded normally. Activate by pressing the “OK” button or pulling the HIGH BEAM lever 4 times. The hazard warning light will blink once.
Mode 2: 30% Mileage Recording – The odometer will register 30 km for every 100 km driven. Speedometer shows actual speed. Activate by pressing the “OK” button or pulling the HIGH BEAM lever 4 times. The hazard warning light will blink twice.
Mode 3: 20% Mileage Recording – The odometer will register 20 km for every 100 km driven. Speedometer shows actual speed. Activate by pressing the “OK” button or pulling the HIGH BEAM lever 4 times. The hazard warning light will blink three times.

Key Advantages of Dynotest for Audi TT Owners

Our Dynotest mileage blocker for Audi TT, TT RS FV (18 PIN) is built for precision and reliability. It’s a professional-grade odometer freezer that ensures your vehicle’s systems remain unaffected during testing. This device remembers your selected mode even after the ignition is turned off and on, providing consistent performance. It’s an indispensable speedstop and odometer stopper for tuning professionals, workshop technicians, and dyno centers requiring accurate data without altering the car’s recorded mileage. Please note, this device is not intended for use on public roads. Remember to turn off the ignition during device connection/disconnection and switch between modes on a stationary car.

Compatibility and Support for Your Audi TT Dynotest

This specific Dynotest for Audi TT, TT RS – FV is exclusively designed for vehicles equipped with an 18 PIN connector. If your Audi TT FV has a 32 PIN connector, please explore our Audi TT – FV (32 PIN) mileage blocker. For detailed setup information, refer to our installation instructions. Should you have any questions, our technical support team is ready to assist you. You can also find answers in our FAQ section or locate a local expert via our distributor list. For shipping information, please check our delivery page.

Dynotest: Your Trusted Partner for Car Mileage Blockers

Beyond the Audi TT and TT RS FV, Dynotest offers a comprehensive range of mileage blockers, odometer stoppers, and CAN filter blockers for various leading automotive brands, including Audi, BMW, Mercedes, Porsche, Ford, Volkswagen, Toyota, Lamborghini, Range Rover, Skoda, and SEAT. Our commitment to quality and precision makes Dynotest a preferred choice for automotive professionals worldwide. Explore our product catalog for other solutions like mileage jammers, speed testers, and advanced diagnostic tools. We cater to the needs of private users, garages, and professional tuners, ensuring accurate performance analysis without impacting odometer readings.

Ready to optimize your vehicle testing? Discover your ideal Dynotest module today.

SERVICE CENTER

CUSTOMER CENTER →

SHIPPING →

TECHNICAL SUPPORT →

INSTALLATION SUPPORT →