What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for Bentley Continental GT III (18 PIN)
2020-2024

€ 393.60

(incl. taxes)

Product code : DNTBENV4

Product Information

Pay attention!

Bentley Continental GT III car has 2 types of connectors: 32 PIN and 18 PIN.
This device is designed for a 18 PIN connector.

Choose this device if your car has an 32 PIN connector:
Bentley Continental GT III (32 PIN)

In cars with 2020 or later software, the check engine light may turn on while the device is in use. The light will turn off after driving a few kilometers with the device in the first mode (mode 1 - NOT ACTIVE), removing the device, or manually clearing the error with a diagnostic tool. This error is related to communication and data transmission between modules while the device is active.

This device is specifically designed for testing Bentley Continental GT III (18 PIN).

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€ 393.60Add to basket

How to install
Bentley Continental GT III (18 PIN)

Coming Soon

1

Mode 1

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.

2

Mode 2

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will show the actual speed.

3

Mode 3

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 2 km for every 100 km driven.
Speedometer will show the actual speed.

4

Mode 4

Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light on the dashboard will blink 4 times.
The mileage block function will be FULL active.
Speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE:

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

Bentley Continental GT III (18 PIN) Mileage Blocker Solution

Unlock advanced mileage control for your Bentley Continental GT III (2020-2024) with the Dynotest Mileage Blocker, specifically engineered for models equipped with the 18 PIN connector. This premier Odometer Stopper is an essential tool for discerning automotive professionals and Bentley enthusiasts who need to temporarily suspend odometer readings during critical diagnostic tests, performance tuning sessions, or specialized off-road evaluations. Our sophisticated CAN Blocker technology, also known as a CAN Filter, ensures that while mileage accumulation is paused or adjusted by the selected mode, your Continental GT III’s speedometer remains fully operational, delivering precise speed data.

Essential Information for Your Bentley Continental GT III (18 PIN) Odometer Blocker

This Dynotest Odometer Blocker is exclusively designed for the Bentley Continental GT III featuring an 18 PIN connector. It is imperative to verify your vehicle’s connector type before purchase to ensure compatibility. Bentley Continental GT III cars have two connector types (32 PIN and 18 PIN). If your car is equipped with a 32 PIN connector, please search for the “Bentley Continental GT III (32 PIN)” Odometer Stopper variant in our product catalog.
An important note (Pay attention!): In Bentley Continental GT III cars with software from 2020 or later, the ‘check engine’ light may illuminate on the dashboard while this Mileage Stopper is active. This indicator light will typically turn off automatically after driving a few kilometers with the device in Mode 1 (inactive), upon removal of the device, or by manually clearing the error using a standard diagnostic tool. This behavior is related to specific communication and data transmission protocols between vehicle modules when the device is operational.
This car Mileage Freezer offers simple Plug & Play installation, removing any requirement for soldering or complex wiring adjustments, and is intended solely for off-road and laboratory testing environments, not for use on public highways. Users looking for such devices may also search for terms like Mileage Freezer, Odometer Freezer, or CAN Freezer when seeking solutions to manage mileage during tests.

Operating Modes for Your Bentley Continental GT III (18 PIN) Dynotest Blocker

The Dynotest device for your Bentley Continental GT III (18 PIN) provides versatile operating modes to accommodate a variety of testing needs. Conveniently, mode selection can be initiated by either pressing the “OK” button on your steering wheel or by pulling the HIGH BEAM lever 4 times consecutively while the vehicle is stationary. The dashboard’s hazard warning light will blink to confirm the successfully selected mode:

Mode 1: Press “OK” button or pull HIGH BEAM lever 4 times. Hazard warning light blinks once. The mileage block function is OFF (odometer records 100% of mileage). Speedometer shows actual speed.
Mode 2: Press “OK” button or pull HIGH BEAM lever 4 times. Hazard warning light blinks twice. The odometer will register 50 km for every 100 km driven. Speedometer shows actual speed.
Mode 3: Press “OK” button or pull HIGH BEAM lever 4 times. Hazard warning light blinks twice. The odometer will register 2 km for every 100 km driven. Speedometer shows actual speed.
Mode 4: Press “OK” button or pull HIGH BEAM lever 4 times. Hazard warning light on the dashboard will blink 4 times. The mileage block function will be FULLY ACTIVE (odometer records 0 km). Speedometer shows actual speed.

This adaptable odometer stop filter, which can be described as a km freezer or mileage stopper module, delivers the precise level of mileage control essential for your Bentley Continental GT III during specialized testing, ensuring accurate data collection without adding unwanted mileage to your vehicle’s record.

Safe Installation and Usage for Bentley Continental GT III 18 PIN Blocker

To guarantee correct installation and the reliable, long-term performance of your Bentley Continental GT III (18 PIN) Mileage Blocker, please strictly adhere to these crucial guidelines: Always ensure the vehicle’s ignition is turned OFF before connecting or disconnecting the Dynotest unit. Switching between the various operational modes should only be carried out when the car is completely stationary. The selected mode is automatically saved by the device and will be retained even after the ignition is turned off and then powered back on. For detailed, step-by-step setup instructions, please refer to our comprehensive installation guide. This Dynotest, a leading car mileage stopper (or Odometer Freezer), is engineered for straightforward use even in high-performance luxury vehicles like the Bentley Continental GT III.

Dynotest CAN Blockers Premium Solutions for Bentley and Other Luxury Auto Marques

Dynotest is a distinguished provider of high-quality Odometer Blockers and Mileage Stoppers for an elite range of vehicles, including Bentley. Our expertise also encompasses other leading luxury and performance automotive manufacturers such as Lamborghini, Porsche, Audi, BMW, and Mercedes. Whether you are in search of a Speedstop device, a specific CAN filter blocker, or a general car Mileage Blocker (sometimes referred to as a Meter Stopper) for facilitating performance tests, ECU calibration, or dynamometer analysis on your high-value vehicle, our products are meticulously engineered for unparalleled precision and are trusted by automotive professionals globally.

We encourage you to explore our complete product catalog to discover other innovative solutions such as mileage jammers, speed testers, and a variety of Dynotest diagnostic tools. We address the specialized requirements of private owners of luxury vehicles, professional automotive garages, and performance tuning centers, offering advanced Odometer Freezer tools and other solutions sometimes searched for as “Mileage Correction” tools for specific testing environments.

Support for Your Bentley Continental GT III Mileage Freezer Device

Should you require any assistance with the installation or operation of your Bentley Continental GT III (18 PIN) Mileage Stopper, our detailed FAQ page provides a wealth of useful information. Alternatively, you are always welcome to contact our expert technical support team. For information regarding our shipping procedures, please see the delivery page. To find an authorized local dealer or professional installer, please consult our list of distributors. We are dedicated to providing exceptional support for your Dynotest Odometer Blocker, ready to answer any questions related to compatibility, setup, or usage for your Bentley.

Ready to optimize testing procedures for your Bentley Continental GT III (18 PIN)? Order your Dynotest module today!

SERVICE CENTER

CUSTOMER CENTER →

SHIPPING →

TECHNICAL SUPPORT →

INSTALLATION SUPPORT →