What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for BMW 5 Series - G30, G31, G38, F90
2017-2024

€ 307.50

(incl. taxes)

Previous lowest price was € 307.50.

Product code : DNTBMWG

Product Information

Pay attention!

The (BC) will not function properly because it cannot calculate values without having the mileage and it's NORMAL. When the device is activated, the on-board computer readings ("Average fuel consumption", "Current fuel consumption", "Fuel") and the navigation monitor ("On-board information" or "Trip computer", "Cruising range", "Distance to destination", "Fuel economy") will have incorrect values. After deactivating the device, you must RESET the on-board computer from the BC and the navigation menu. The BC will then start working correctly again.

Adaptive cruise control, ACC and radar work in all modes!

This device is specifically designed for testing BMW 5 Series - G30, G31, G38, F90 cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

Installing this device may cause the displayed average and current fuel consumption to be higher than the actual values.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€ 307.50Add to basket

How to install
BMW 5 Series - G30, G31, G38, F90

Coming Soon

1

Mode 1

Press and hold the "BC" button for 10 seconds.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.

2

Mode 2

To activate this mode, press and hold the "BC" button for 10 seconds.
The hazard warning light will blink twice.
The odometer will register 40 km for every 100 km driven.
Speedometer will show the actual speed.

3

Mode 3

Press and hold the "BC" button for 10 seconds.
The hazard warning light will blink three times.
The odometer will register 30 km for every 100 km driven.
Speedometer will show the actual speed.

4

Mode 4

ONLY for cars with software update BEFORE 2019.
Press and hold the "BC" button for 10 seconds.
The hazard warning light will blink four times.
The odometer will register 1-2 km for every 100 km driven.
Speedometer will show the actual speed.

5

Mode 5

Press and hold the "BC" button for 10 seconds.
The hazard warning light will blink five times.
The odometer will register 1-2 km for every 100 km driven.
Speedometer will NOT show the actual speed.

Unlock full control over your BMW’s odometer with the Dynotest device, designed specifically for BMW 5 Series models G30, G31, G38, and F90 from 2017 to 2024. This advanced tool functions as a reliable mileage blocker, allowing you to manage and protect your car’s odometer with precision. Whether you need a mileage stopper to preserve your vehicle’s resale value or an odometer blocker to prevent unwanted mileage changes, the Dynotest ensures top-level security and performance.

Engineered for seamless integration, the Dynotest acts as a milage blocker and odometer stopper, giving you peace of mind during maintenance, diagnostics, or long-term storage. Its intuitive design makes it easy to install and operate, while maintaining complete compatibility with your BMW’s onboard systems. This Mileage blocker device is an essential tool for professionals and enthusiasts who demand accuracy and reliability without compromising the integrity of the car’s electronics.

Protect your investment and maintain control over your BMW’s mileage with the Dynotest – the ultimate solution for anyone seeking an odometer blocker, mileage stopper, or advanced milage blocker device for the 2017-2024 BMW 5 Series. Experience unmatched reliability and precision every time.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

OTHER, ALTERNATIVE PRODUCT NAMES SEARCHED FOR:

Mileage Blocker, Mileage Stopper, Odometer Stopper, Odometer Blocker, Mileage Correction, CAN Filter, CAN Blocker, Mileage Freezer, Odometer Freezer, CAN Freezer.

SERVICE CENTER

CUSTOMER CENTER →

SHIPPING →

TECHNICAL SUPPORT →

INSTALLATION SUPPORT →

Dynotest for BMW 5 Series - G30, G31, G38, F902017-2024

Product Information

How to installBMW 5 Series - G30, G31, G38, F90

Information about the operation modes of the device on BMW 5 Series - G30, G31, G38, F90 cars.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

OTHER, ALTERNATIVE PRODUCT NAMES SEARCHED FOR:

SERVICE CENTER

ATTENTION!

Dynotest for BMW 5 Series - G30, G31, G38, F90
2017-2024

How to install
BMW 5 Series - G30, G31, G38, F90