What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for Chrysler Voyager
2019-2025

€ 405.90

(incl. taxes)

Previous lowest price was € 405.90.

Product code : DNTCHRV1

Product Information

This device is specifically designed for testing Chrysler Voyager cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

Installing this device may cause the displayed average and current fuel consumption to be higher than the actual values.

It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€ 405.90Add to basket

How to install
Chrysler Voyager

Coming Soon

1

Mode 1

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.

2

Mode 2

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will show the actual speed.

3

Mode 3

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink three times.
The odometer will register 10 km for every 100 km driven.
Speedometer will show the actual speed.

4

Mode 4

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink three times.
The odometer will register 2 km for every 100 km driven.
Speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

Dynotest Mileage Blocker for Chrysler Voyager 2019-2025

The Dynotest module for the Chrysler Voyager is a professional-grade mileage blocker and odometer stopper designed for precise vehicle diagnostics. This advanced device gives you the ability to temporarily suspend mileage accumulation during dyno testing, chip tuning, and other service procedures. As a dedicated CAN bus blocker, it ensures that the vehicle’s recorded mileage remains accurate while you conduct performance and quality checks. It’s the perfect choice for professionals and enthusiasts seeking a reliable mileage freezer for the Chrysler Voyager.

Seamless Odometer Stopper for Chrysler Voyager

Our odometer stopper is built with plug and play technology, making installation exceptionally simple. There’s no need for soldering or extensive technical knowledge. The device integrates perfectly with your Chrysler Voyager’s CAN system, allowing you to easily stop mileage accumulation. For step-by-step instructions and video guides, you can always check our installation instructions.

Flexible Operating Modes for the Chrysler Voyager Mileage Blocker

The Dynotest mileage blocker offers four distinct operational modes for flexible control over mileage recording. You can switch between modes effortlessly using the HIGH BEAM lever. Each mode change is confirmed by the hazard warning light blinking on the dashboard, so you always know your active setting. The selected mode is automatically saved and will remain active even after you turn the ignition off and on again.

Mode 1: Pull the HIGH BEAM lever 4 times. The mileage block function is inactive, and the odometer records 100% of the driven distance. The speedometer shows the actual speed.
Mode 2: Pull the HIGH BEAM lever 4 times. The odometer registers 50 km for every 100 km driven. The speedometer shows the actual speed.
Mode 3: Pull the HIGH BEAM lever 4 times. The odometer registers 10 km for every 100 km driven. The speedometer shows the actual speed.
Mode 4: Pull the HIGH BEAM lever 4 times. The odometer registers 2 km for every 100 km driven. The speedometer shows the actual speed.

The Ultimate Odometer Blocker for the Chrysler Voyager and Beyond

While this module is designed for the Chrysler Voyager, our range of products includes odometer blockers and mileage stoppers for a wide variety of car brands, including Audi, BMW, Mercedes, Porsche, Ford, Volkswagen, and Lamborghini. The Dynotest CAN blocker is a versatile tool, essential for any workshop or tuning center. Explore our full range of solutions on our homepage to find a mileage blocker that fits your needs.

Support and Resources for Your Dynotest Mileage Stopper

At Dynotest, we are committed to providing top-quality products and excellent customer support. If you have any questions about your new odometer stopper module or need assistance with installation, our team is ready to help. You can find detailed information and answers to common questions in our FAQ section or by reaching out to our technical support team. For delivery information and to find a local distributor, please visit our delivery page or distributor contacts.

Enhance Your Diagnostics with a Dynotest Odometer Freezer

Our odometer stoppers and CAN filter blockers are engineered for precision and reliability. They are the ideal choice for anyone looking for a speedstop or speed tester tool. Visit our product catalog to discover more Dynotest solutions and take your vehicle diagnostics to the next level. Ready to improve your testing capabilities? Get your Dynotest module today.

SERVICE CENTER

CUSTOMER CENTER →

SHIPPING →

TECHNICAL SUPPORT →

INSTALLATION SUPPORT →