What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for FIAT Talento
2016-2020

€ 430.50

(incl. taxes)

Product code : DNTRENV1

Product Information

Pay attention!

Due to the fact that the mileage (ODO) stored in the ABS and BSI modules is active, the current mileage from these modules is returned to the odometer after uninstalling Dynotest.

This device is specifically designed for testing FIAT Talento cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€ 430.50Add to basket

How to install
FIAT Talento

Coming Soon

1

Mode 1

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.

2

Mode 2

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will show the actual speed.

3

Mode 3

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 2 km for every 100 km driven.
Speedometer will show the actual speed.

4

Mode 4

Pull HIGH BEAM lever 4 times.
The hazard warning light on the dashboard will blink 4 times.
The mileage block function will be FULL active.
Speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE:

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

FIAT Talento 2016-2020 Dynotest Mileage Blocker for Testing

The Dynotest mileage blocker for the FIAT Talento (model years 2016-2020) is a specialized device engineered for professionals and enthusiasts needing precise control over odometer readings during vehicle testing. This odometer stopper allows you to temporarily suspend mileage accumulation, making it an ideal tool for dyno testing, performance evaluations, and diagnostic procedures without adding unnecessary kilometers to your FIAT Talento. Our CAN blocker technology ensures that while the mileage count is paused or altered according to the selected mode, the speedometer remains fully functional, displaying the actual speed.

Key Features of Your FIAT Talento Odometer Blocker (DNTRENV1)

This Dynotest odometer stopper for FIAT Talento offers simple Plug & Play installation, eliminating any need for complex wiring or soldering. It’s a reliable CAN bus blocker designed to integrate smoothly with your vehicle’s electronics. When using this mileage freezer tool, you can be confident in its non-intrusive operation for testing purposes. Please note: the mileage (ODO) stored in the ABS and BSI modules is active. Consequently, after uninstalling the Dynotest device, the current mileage from these modules will be restored to the odometer. This device is intended for off-road and laboratory testing environments only.

Operating Modes for the FIAT Talento Mileage Stopper Module

The Dynotest device for your FIAT Talento 2016-2020 features several distinct operating modes, allowing you to choose the level of mileage blocking required for your specific testing scenario. Switching between modes is done by pulling the HIGH BEAM lever 4 times consecutively while the vehicle is stationary. The dashboard hazard warning light will blink to confirm the mode change:

Mode 1: Pull HIGH BEAM lever 4 times. Hazard warning light blinks once. Mileage blocking function is OFF (odometer records 100% of mileage). Speedometer shows actual speed.
Mode 2: Pull HIGH BEAM lever 4 times. Hazard warning light blinks twice. Odometer registers 50 km for every 100 km driven. Speedometer shows actual speed.
Mode 3: Pull HIGH BEAM lever 4 times. Hazard warning light blinks twice. Odometer registers 2 km for every 100 km driven. Speedometer shows actual speed.
Mode 4: Pull HIGH BEAM lever 4 times. Hazard warning light blinks 4 times. Mileage blocking function is FULLY ACTIVE (odometer records 0 km). Speedometer shows actual speed.

This versatile odometer stop filter ensures you have the flexibility needed for various car testing applications, from a partial stop of mileage to a complete km freezer effect.

Safe Installation and Usage for Your FIAT Talento Dynotest

To ensure successful installation and reliable operation of your FIAT Talento mileage blocker, please adhere to the following guidelines: Always turn the ignition OFF during device connection or disconnection. Mode switching should only be performed when the car is stationary. Once a mode is selected, it will be retained (saved) even after the ignition is turned off and on again. For detailed setup steps, refer to our comprehensive installation instructions. This OBD mileage blocker (though primarily a CAN-based device for this model) is designed for ease of use.

Dynotest CAN Blockers: Trusted for FIAT and Other Premier Brands

Dynotest odometer blockers and mileage stoppers are engineered for precision and are compatible with a wide array of leading automotive manufacturers beyond FIAT, including Audi, BMW, Mercedes, Porsche, Ford, Volkswagen, and Toyota. Whether you require a mileage blocker for dyno runs, performance analysis, or ECU calibration, our modules like the Speedstop and other CAN filter blockers deliver consistent and reliable results, making them a preferred choice for car enthusiasts and automotive professionals.

Explore our extensive product catalog to discover a wide range of solutions such as car mileage stoppers, speed testers, and advanced Dynotest diagnostic tools. We cater to the needs of individual users, garages, and professional tuning centers worldwide, offering devices like mileage jammers and odometer freezer tools for various applications.

Support for Your FIAT Talento Mileage Blocker Device

If you need assistance with the setup or usage of your FIAT Talento mileage stopper, please visit our FAQ page or contact our technical support team. For information regarding shipping and handling, check our delivery page. You can also find a local expert or installer through our list of distributors. Our dedicated support team is always ready to help with compatibility queries, installation guidance, and any operational questions regarding your Dynotest odometer blocker.

Ready to enhance your FIAT Talento’s testing capabilities? Get your Dynotest module today!

SERVICE CENTER

CUSTOMER CENTER →

SHIPPING →

TECHNICAL SUPPORT →

INSTALLATION SUPPORT →