Dynotest for Mercedes V-class
2015-2022

€258.30

(incl. taxes)

Product code : DNTMBV1

Product Information

This device is specifically designed for testing Mercedes cars.
It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.
It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€258.30Add to basket

Mercedes V-Class II | Dynotest Emulator | Installation, Operating Modes

1

Mode 1

In this mode, the mileage block function is not active.

2

Mode 2

To activate this mode, push the "Return" button 3 times.
Upon activation, the hazard warning light on the dashboard will blink twice.
After that, the odometer will register 50 kilometers for every 100 kilometers driven, and the speedometer will display the actual speed.

3

Mode 3

Push the "Return" button 3 times.
The hazard warning light on the dashboard will blink 3 times.
From then on, the odometer will count 2 kilometers for every 100 kilometers driven, and the speedometer will show the actual speed.

4

Mode 4

Push and hold the "Return" button 3 times.
The hazard warning light on the dashboard will blink 4 times.
From then on, the odometer will be stopped - the mileage block function is active; the speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.