Dynotest for MINI Cooper
2015-2024

€356.70

(incl. taxes)

Product code : DNTBMWI

Product Information

This device is specifically designed for testing BMW cars.
It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.
It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€356.70Add to basket

How to install
MINI Cooper

1

Mode 1

Press and hold the "BC" button for 5 seconds.
The hazard warning light on the dashboard will blink once.
In this mode, the mileage block function is not active.

2

Mode 2

To activate this mode, press and hold the "BC" button for 5 seconds.
Upon activation, the hazard warning light on the dashboard will blink twice.
After that, the odometer will record 50 km for every 100 km driven, and the speedometer will display 50% of the actual speed.
This mode is suitable for cars with both software: before 2018 and after 2018.

3

Mode 3

Press and hold the "BC" button for 5 seconds.
The hazard warning light on the dashboard will blink 3 times.
After that, the odometer will record 10 km for every 100 km driven, and the speedometer will show the actual speed.
This mode is suitable for cars with both software: before 2018 and after 2018.

4

Mode 4

Press and hold the "BC" button for 5 seconds.
The hazard warning light on the dashboard will blink 4 times.
After that, the odometer will record approximately 1-2 km for every 100 km driven, and the speedometer will show the actual speed.
This mode is suitable for cars with both software: before 2018 and after 2018.

5

Mode 5

Press and hold the "BC" button for 5 seconds.
The hazard warning light on the dashboard will blink 5 times.
The odometer will stop, and the speed indicator will show the actual speed.
ONLY for cars with software update BEFORE 2018.

EXPLANATION
The (BC) will not function properly because it cannot calculate values without having the mileage and it’s NORMAL. When the device is activated, the on-board computer readings (“Average fuel consumption”, “Current fuel consumption”, “Fuel”) and the navigation monitor (“On-board information” or “Trip computer”, “Cruising range”, “Distance to destination”, “Fuel economy”) will have incorrect values. After deactivating the device, you must RESET the on-board computer from the BC and the navigation menu. The BC will then start working correctly again.

Adaptive cruise control, ACC and radar work in all modes!

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.