English
Shipping to:
Shipping to:

Dynotest for Opel Vivaro II
2014-2019

 430.50
(incl. taxes)
Product code : DNTRENV1

Product Information

Pay attention!

Due to the fact that the mileage (ODO) stored in the ABS and BSI modules is active, the current mileage from these modules is returned to the odometer after uninstalling Dynotest.

This device is specifically designed for testing FIAT Talento cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

 430.50Add to basket

How to install
Opel Vivaro II

Coming Soon

Information about the operation modes of the device on Opel Vivaro II cars.

The hazard warning light on the dashboard will blink each time when the device switches between modes.

1
Mode 1
Pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.
2
Mode 2
Pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will show the actual speed.
3
Mode 3
Pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 2 km for every 100 km driven.
Speedometer will show the actual speed.
4
Mode 4
Pull HIGH BEAM lever 4 times.
The hazard warning light on the dashboard will blink 4 times.
The mileage block function will be FULL active.
Speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE:

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

Opel Vivaro II Odometer Blocker Tool Dynotest

Introducing the Dynotest Odometer Blocker tool, specifically engineered for your Opel Vivaro II (model years 2014-2019). This advanced mileage stopper is designed for vehicle testing scenarios, allowing you to temporarily suspend mileage recording. This is essential for accurate dynamometer testing, performance evaluations, and other diagnostic procedures on your Opel Vivaro II without accumulating unnecessary kilometers. Our reliable CAN filter technology ensures seamless integration with your vehicle’s electronics.

Important Usage Information Opel Vivaro II Dynotest Users

Pay attention! For the Opel Vivaro II (model years 2014-2019), it’s crucial to understand that mileage (ODO) is actively stored in the ABS and BSI modules. Consequently, after uninstalling the Dynotest device, the current mileage value from these modules will be returned to the odometer. This mileage stopper is intended for temporary testing purposes only and not for use on public roads.

Simple Plug and Play Installation Opel Vivaro II Mileage Blocker

The Dynotest device for the Opel Vivaro II features a user-friendly Plug and Play installation, completely eliminating any need for soldering. This innovative design makes setting up your car mileage blocker exceptionally quick and straightforward. Simply follow our clear video instructions for a correct and trouble-free connection, ensuring your Opel Vivaro II odometer stopper is ready for any controlled testing environment. This tool is also referred to as a mileage freezer or CAN freezer.

Operating Modes for Your Opel Vivaro II Odometer Stopper

Our mileage stopper for the Opel Vivaro II (2014-2019) offers several distinct operating modes to suit your specific testing needs. Mode selection is easily performed with the vehicle stationary by pulling the HIGH BEAM lever 4 times. The hazard warning light on the dashboard will blink to confirm each mode change. Importantly, the speedometer on your Opel Vivaro II will consistently display the actual speed in all operating modes.

  • Mode 1: Pull HIGH BEAM lever 4 times. The hazard warning light blinks once. The mileage block function is NOT active. Speedometer shows the actual speed on your Opel Vivaro II.
  • Mode 2: Pull HIGH BEAM lever 4 times. The hazard warning light blinks twice. The odometer on your Opel Vivaro II registers 50 km for every 100 km driven. Speedometer shows the actual speed.
  • Mode 3: Pull HIGH BEAM lever 4 times. The hazard warning light blinks twice again (confirming a distinct third mode). The odometer on your Opel Vivaro II registers only 2 km for every 100 km driven. Speedometer shows the actual speed.
  • Mode 4: Pull HIGH BEAM lever 4 times. The hazard warning light on the dashboard blinks 4 times. The mileage block function is FULLY active (complete mileage freeze). The odometer freezer stops all mileage accumulation on your Opel Vivaro II. Speedometer shows the actual speed.

Key Usage Guidelines Opel Vivaro II Mileage Freezer

For successful installation and reliable use of your Opel Vivaro II mileage freezer, please adhere to these important recommendations: Always ensure the vehicle’s ignition is turned off during the device connection or disconnection process. Switching between the different operating modes should only be done when your Opel Vivaro II is stationary. The selected mode for this odometer stopper module will be retained (saved) even after the ignition is turned off and on, offering convenience for repeated testing scenarios.

Alternative Names Opel Vivaro II CAN Blocker Device

This Dynotest tool for the Opel Vivaro II (2014-2019) is also known by various other names in the automotive testing field, such as Mileage Stopper, Odometer Stopper, Odometer Blocker, CAN Filter, CAN Blocker, Mileage Freezer tool, Odometer Freezer, and CAN Freezer. While some may search for “mileage correction” tools, it’s vital to note this device is designed for temporarily stopping mileage for testing, not for altering legally recorded mileage. If you need a “speed blocker” or a reliable “dynotester” for your Opel Vivaro II, this device meets specialized testing needs.

Why Choose Dynotest for Your Opel Vivaro II (2014-2019)

Dynotest delivers effective and trustworthy solutions like the odometer blocker tool for the Opel Vivaro II (2014-2019), specifically designed for precise performance testing and diagnostics. Our devices, including this car mileage blocker and odometer freezer, are utilized by automotive professionals and testers who require the best “mileage blocker Opel” technology, while understanding the vehicle’s specific data storage in ABS/BSI modules. Explore our product catalog for a wide array of tools, helping you find the perfect CAN bus blocker for your Opel van or other vehicles.

Installation and Support Opel Vivaro II Mileage Stopper Module

Require assistance with your Opel Vivaro II mileage stopper tool? Our comprehensive installation instructions offer clear, easy-to-follow guidance. For any additional questions regarding your Opel Vivaro II odometer blocker, please consult our extensive FAQ page or reach out to our expert technical support team. Information on shipping can be found on our delivery page, and you can find local specialists via our distributors list.

Dynotest Solutions for Other Opel Models and Van Brands

Beyond the Opel Vivaro II (2014-2019), Dynotest provides mileage blockers, odometer stoppers, and CAN filters for an extensive range of vehicle manufacturers, including other Opel models and many commercial vans and passenger cars. Our inventory includes devices for top brands like Renault, Ford, Mercedes-Benz, Volkswagen, Audi, BMW, and Toyota. Whether you need an OBD mileage blocker for dyno testing or an odometer stopper module for performance analysis, browse our catalog of solutions for advanced tools like speedstop devices and mileage jammers designed for modern vehicles.

Ready to enhance your vehicle testing capabilities for your Opel Vivaro II? Get your Dynotest module today, keeping in mind its specific operational characteristics and the ABS/BSI module behavior.

SERVICE CENTER

Select your currency