What is a Mileage Blocker?

A Mileage Blocker is a device designed to stop the odometer from recording mileage during vehicle testing. This tool ensures that no additional mileage is logged while performing diagnostics, making it essential for accurate testing without affecting the car's recorded mileage.

How does a Mileage Blocker work?

A Mileage Blocker works by temporarily interrupting the signal between the vehicle's speed sensors and the odometer, effectively freezing the mileage count. This allows you to conduct performance tests without adding extra miles to the odometer.

Is the Mileage Blocker easy to install?

Yes, Mileage Blockers are designed for easy installation. They feature a plug-and-play system that requires no special tools or technical expertise, allowing you to install the device in minutes.

Can a Mileage Blocker be detected during a vehicle inspection?

No, a properly installed Mileage Blocker is undetectable during routine vehicle inspections. It operates without leaving any traces, ensuring that the vehicle's original mileage remains unaffected.

Is the Mileage Blocker compatible with all vehicle models?

Mileage Blockers from Dynotest are compatible with a wide range of vehicle models. We offer specific versions of the device tailored to different car brands and models, ensuring seamless integration with your vehicle's electronics.

Why should I use a Mileage Blocker during vehicle testing?

Using a Mileage Blocker during vehicle testing prevents unnecessary mileage from being added to your car. This is crucial for maintaining accurate mileage records, especially for professionals in the automotive industry who require precise data for diagnostics and performance tuning.

Will using a Mileage Blocker affect my car’s performance?

No, using a Mileage Blocker will not affect your car’s performance. The device only pauses the odometer, ensuring that no mileage is recorded during tests without interfering with the vehicle’s functionality.

Can I use the Mileage Blocker for long-term use?

Mileage Blockers are intended for temporary use during specific testing and diagnostic procedures. It is important to deactivate the device after testing to resume normal mileage recording.

Do Mileage Blockers comply with legal regulations?

The legality of Mileage Blockers varies by jurisdiction. They are typically intended for off-road testing and diagnostics only. It is essential to check local laws and regulations before using the device on public roads.

Where can I buy a Mileage Blocker?

You can purchase a Mileage Blocker directly from Dynotest's official website - dynotestpro.com. We offer worldwide shipping, including to regions like Europe, USA, and beyond. Visit our Product Catalog for more details.

Dynotest for Peugeot Expert
2016-2024

€ 369.00

(incl. taxes)

Product code : DNTPSAV1

Product Information

Pay attention!

Due to the fact that the mileage (ODO) stored in the ABS and BSI modules is active, the current mileage from these modules is returned to the odometer after uninstalling Dynotest.

This device is specifically designed for testing Peugeot Expert cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

€ 369.00Add to basket

How to install
Peugeot Expert

Coming Soon

1

Mode 1

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.

2

Mode 2

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will show the actual speed.

3

Mode 3

Pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 10 km for every 100 km driven.
Speedometer will show the actual speed.

4

Mode 4

Pull HIGH BEAM lever 4 times.
The hazard warning light on the dashboard will blink 4 times.
The mileage block function will be FULL active.
Speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE:

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

Peugeot Expert 2016-2024 Dynotest Odometer Stopper for Testing

Introducing the Dynotest mileage blocker, specifically engineered for the Peugeot Expert models from 2016 to 2024. This advanced odometer stopper is an indispensable tool for automotive workshops, tuning specialists, and vehicle enthusiasts who need to manage mileage recording accurately during diagnostic sessions, performance testing on a dynamometer, or other off-road evaluations. Leveraging sophisticated CAN blocker technology, our device allows for the temporary suspension of mileage accumulation on your Peugeot Expert, ensuring test procedures don’t inflate its odometer reading, while the speedometer continues to function and display the true speed.

Key Features of the Peugeot Expert Mileage Blocker (DNTPSAV1)

The Dynotest odometer stopper for the Peugeot Expert offers a straightforward Plug & Play installation, which means no soldering or alterations to your vehicle’s wiring are necessary. As a leading CAN bus blocker, it integrates flawlessly with your Peugeot Expert’s electronic systems. This mileage freezer tool ensures non-intrusive operation, crucial for maintaining vehicle integrity during testing. Please note (Pay attention!): the mileage (ODO) data logged in the ABS and BSI modules is active. Consequently, when the Dynotest device is uninstalled, the mileage recorded by these modules will be restored to the dashboard odometer. This car mileage blocker is designed for off-road and laboratory use only.

Operating Your Peugeot Expert Dynotest: Mileage Blocker Modes

The Dynotest device for your Peugeot Expert (2016-2024) provides several user-selectable operating modes to suit different testing scenarios. You can easily switch between modes by pulling the HIGH BEAM lever 4 times in succession while the vehicle is stationary. The hazard warning light on the dashboard will blink to indicate the selected mode:

Mode 1: Pull HIGH BEAM lever 4 times. The hazard warning light will blink once. Mileage blocking function is OFF (odometer records 100% of mileage). Speedometer shows actual speed.
Mode 2: Pull HIGH BEAM lever 4 times. The hazard warning light will blink twice. The odometer will register 50 km for every 100 km driven. Speedometer shows actual speed.
Mode 3: Pull HIGH BEAM lever 4 times. The hazard warning light will blink twice. The odometer will register 10 km for every 100 km driven. Speedometer shows actual speed.
Mode 4: Pull HIGH BEAM lever 4 times. The hazard warning light on the dashboard will blink 4 times. The mileage block function will be FULLY ACTIVE (odometer records 0 km). Speedometer shows actual speed.

This adaptable odometer stop filter, also known as a km freezer or mileage stopper module, provides the precision control you need for your Peugeot Expert, ranging from partial mileage count to a full stop of mileage recording during tests.

Safe Installation and Usage for Your Peugeot Expert Blocker

To ensure a smooth installation and the reliable long-term use of your Peugeot Expert mileage blocker, please adhere to these vital guidelines: Always ensure the vehicle’s ignition is turned OFF before connecting or disconnecting the Dynotest device. Mode selection should exclusively be performed when the car is stationary. The selected mode is automatically memorized and will be retained even after the ignition is cycled off and on. For complete, easy-to-follow setup instructions, please refer to our comprehensive installation guide. This Dynotest, a premier car mileage stopper, is designed with user convenience in mind.

Dynotest CAN Blockers: Trusted for Peugeot and Other Top Auto Brands

Dynotest is a leader in providing high-quality odometer blockers and mileage stoppers, not only for Peugeot vehicles but also for a wide spectrum of other leading automotive manufacturers, including Audi, BMW, Mercedes, Ford, Volkswagen, and Toyota. Whether you are looking for a Speedstop device, a specific CAN filter blocker, or a general car mileage blocker to facilitate performance testing, ECU calibration, or dyno analysis, our products are meticulously engineered for accuracy and are trusted by automotive professionals globally.

We encourage you to explore our full product catalog to find other innovative solutions, such as mileage jammers, speed testers, and a variety of Dynotest diagnostic tools. We cater to the diverse needs of private car owners, professional garages, and specialized tuning centers, offering advanced odometer freezer tools and meter stoppers.

Support for Your Peugeot Expert Mileage Freezer Tool

If you require any assistance with the installation or operation of your Peugeot Expert mileage stopper, our extensive FAQ page offers valuable information. Alternatively, feel free to contact our expert technical support team. For details regarding our shipping policies, please visit the delivery page. To locate an authorized local dealer or professional installer, please consult our list of distributors. We are dedicated to providing outstanding support for your Dynotest odometer blocker, ready to answer any questions related to compatibility, setup, or usage.

Ready to optimize your Peugeot Expert’s testing procedures? Get your Dynotest module today!

SERVICE CENTER

CUSTOMER CENTER →

SHIPPING →

TECHNICAL SUPPORT →

INSTALLATION SUPPORT →