English
Shipping to:
Shipping to:

Dynotest for Audi Q5, SQ5 - FY (Virtual 18 PIN)
2020-2024

 344.40
(incl. taxes)
Product code : DNTVAGV6

Product Information

Pay attention!

Audi Q5, SQ5 - FY car has 3 types of clusters: virtual 32 PIN, virtual 18 PIN and analog.
This device is designed for a Virtual 18 PIN cluster.

Choose this device if your car has an virtual 32 PIN cluster:
Audi Q5, SQ5 - FY (Virtual 32 PIN)

Choose this device if your car has an analog cluster:
Audi Q5, SQ5 - FY (Analog)

In cars with 2020 or later software, the check engine light may turn on while the device is in use. The light will turn off after driving a few kilometers with the device in the first mode (mode 1 - NOT ACTIVE), removing the device, or manually clearing the error with a diagnostic tool. This error is related to communication and data transmission between modules while the device is active.

This device is specifically designed for testing Audi Q5, SQ5 - FY (Virtual 18 PIN) cars.

It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

It is not intended to be used on public roads.

The Plug&Play technology eliminates the need for soldering during installation.

Simply follow the video instructions for proper connection.

 344.40Add to basket

How to install
Audi Q5, SQ5 - FY (Virtual 18 PIN)

Coming Soon

Information about the operation modes of the device on Audi Q5, SQ5 - FY (Virtual 18 PIN) cars.

The hazard warning light on the dashboard will blink each time when the device switches between modes.

1
Mode 1
Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink once.
The mileage block function will be not active.
Speedometer will show the actual speed.
2
Mode 2
Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will show the actual speed.
3
Mode 3
Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light will blink twice.
The odometer will register 2 km for every 100 km driven.
Speedometer will show the actual speed.
4
Mode 4
Press the "OK" button or pull HIGH BEAM lever 4 times.
The hazard warning light on the dashboard will blink 4 times.
The mileage block function will be FULL active.
Speedometer will show the actual speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE:

1. During device connection/disconnection, the ignition must be turned off.
2. Switching between modes should be done on a stationary car.
3. When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

Dynotest for Audi Q5, SQ5 FY (Virtual 18 PIN) – Advanced Odometer Blocker

The Dynotest mileage blocker for Audi Q5 and SQ5 FY models with a Virtual 18 PIN cluster is an essential tool for precise vehicle testing and diagnostics. This innovative CAN bus blocker is engineered to temporarily suspend mileage accumulation, making it ideal for scenarios like dyno testing, chip tuning, and service diagnostics. Specifically designed for the Audi Q5 FY (Virtual 18 PIN) and Audi SQ5 FY (Virtual 18 PIN), it ensures your speedometer functions normally while preventing unwanted odometer readings. Whether you need a reliable mileage stopper or an advanced odometer blocker, this device offers unparalleled control and accuracy for your Audi Q5 or SQ5.

Seamless Integration for Audi Q5 SQ5 (Virtual 18 PIN)

Our Dynotest module integrates effortlessly with the CAN system of your Audi Q5, SQ5 – FY (Virtual 18 PIN). This plug-and-play device requires no soldering or complex software setups, ensuring a hassle-free installation. Simply follow the video instructions for proper connection, and you’re ready to go. Unlike generic solutions, this odometer stopper module is precisely tailored for the Audi Q5 SQ5 FY (Virtual 18 PIN), guaranteeing optimal performance and preventing error messages that can arise from communication and data transmission between modules.

Operating Modes for Audi Q5 and SQ5 Mileage Blocker

The Dynotest mileage blocker for Audi Q5 and SQ5 FY (Virtual 18 PIN) offers four distinct operation modes, providing flexible control over mileage recording. Switching between modes is intuitive, indicated by the hazard warning light on your dashboard. This makes it a versatile meter stopper for various testing requirements.

  • Mode 1: Not Active – The mileage block function is inactive. Your speedometer will show the actual speed, and mileage will be recorded normally. Activate by pressing the “OK” button or pulling the HIGH BEAM lever 4 times. The hazard warning light will blink once.
  • Mode 2: 50% Mileage Recording – The odometer will register 50 km for every 100 km driven. Speedometer shows actual speed. Activate by pressing the “OK” button or pulling the HIGH BEAM lever 4 times. The hazard warning light will blink twice.
  • Mode 3: 2% Mileage Recording – The odometer will register 2 km for every 100 km driven. Speedometer shows actual speed. Activate by pressing the “OK” button or pulling the HIGH BEAM lever 4 times. The hazard warning light will blink twice.
  • Mode 4: Full Mileage Freeze – The mileage block function is fully active. The odometer will not register any mileage. Speedometer shows actual speed. Activate by pressing the “OK” button or pulling the HIGH BEAM lever 4 times. The hazard warning light will blink four times.

Key Advantages of Dynotest for Audi Q5 SQ5 (Virtual 18 PIN)

Our Dynotest mileage blocker for Audi Q5, SQ5 FY (Virtual 18 PIN) is built for precision and reliability. It’s a professional-grade mileage freezer tool that ensures your vehicle’s systems remain unaffected during testing. This device remembers your settings even after power cycles, providing consistent performance. It’s an indispensable odometer freezer for tuning professionals, workshop technicians, and dyno centers requiring accurate data without altering the car’s recorded mileage. Please note, this device is not intended for use on public roads.

Compatibility and Support for Your Audi Q5 SQ5 Dynotest

This specific Dynotest for Audi Q5, SQ5 – FY is exclusively designed for vehicles equipped with a Virtual 18 PIN cluster. If your Audi Q5 or SQ5 FY has a Virtual 32 PIN cluster, please explore our Audi Q5, SQ5 – FY (Virtual 32 PIN) mileage blocker. For analog clusters, we offer the Audi Q5, SQ5 – FY (Analog) mileage blocker. For detailed setup information, refer to our installation instructions. Should you have any questions, our technical support team is ready to assist you. You can also find answers in our FAQ section or locate a local expert via our distributor list.

Dynotest: Your Trusted Partner for Mileage Blockers

Beyond the Audi Q5 and SQ5 FY, Dynotest offers a comprehensive range of mileage blockers and odometer stoppers for various leading automotive brands, including BMW, Mercedes, Porsche, Ford, Volkswagen, Toyota, Lamborghini, Range Rover, Skoda, and SEAT. Our commitment to quality and precision makes Dynotest a preferred choice for automotive professionals worldwide. Explore our product catalog for other solutions like mileage jammers, speed testers, and advanced diagnostic tools. We cater to the needs of private users, garages, and professional tuners, ensuring accurate performance analysis without impacting odometer readings.

Ready to optimize your vehicle testing? Discover your ideal Dynotest module today.

SERVICE CENTER

Select your currency